Which is better, maintenance-free colloidal battery and battery?

The storage battery from the structure is divided into ordinary and colloid, which is also known as maintenance free storage battery. Gel battery is the most simple way is gelling agent is added in the sulfuric acid, sulfuric acid is electro-hydraulic colloidal. Electro-hydraulic of colloidal battery often called gel battery. The difference between gel battery and conventional lead-acid battery is not just about electro-hydraulic to gel. Gel battery and ordinary battery is the biggest difference between the top of the normal battery has a set of water mouth, when the choose and buy must observe carefully, because some vendors with a delicate plastic cover blocked the filler. The top of the gel battery has an observation hole, hole color battery said his state, green is normal, black kui, white said the battery is damaged, it should be replaced as soon as possible.

Gel battery and ordinary battery is the biggest difference between the top of the normal battery has a set of water mouth, when the choose and buy must observe carefully, because some vendors with a delicate plastic cover blocked the filler. The top of the gel battery has an observation hole, hole color battery said his state, green is normal, black kui, white said the battery is damaged, it should be replaced as soon as possible.

Gel battery main advantages: high quality, long cycle life. Gel electrolyte can form a solid protective layer around the plate, protective plate to avoid damage due to vibration or collision, rupture, prevent plate corrosion, but also reduce the battery when using large load short circuit between plate and plate bending, not led to the decrease of the capacity, has the very good physical and chemical protection, is twice that of an ordinary lead-acid battery life.

The use of safe, environmentally friendly, green power belongs to the true sense. Gel battery electrolyte and solid, sealing structure, gel electrolyte, never leakage, to keep the proportion of each part. Use special calcium lead tin alloy plate grid, more resistant to corrosion, charging accept ability is better. Using high strength plate to avoid short circuit. Imported high quality safety valve, precise control valve to adjust pressure. Equipped with filtering acid mist flame-proof device, more safe and reliable. When using no precipitate removing acid gas, no electrolyte spillover, the production process does not contain harmful to human body elements, non-toxic, non-polluting, avoid the traditional lead-acid battery electrolyte in the process of using a large number of spillover. Small floating charge current, less calorific power battery, the electrolyte acid stratification does not occur.

Deep discharge cycle performance is good. Battery deep discharge and then timely supplement electric power capacity can get back to 100% charge, can cater to the needs of the high frequency, degree of deep discharge, so the scope of its use more widely than lead-acid batteries.

It also has the uniformity, deep discharge performance ability, potential difference is small, up and down large capacitance. Keep ability at low temperature starting ability, charged, electrolyte retention, cyclic endurance ability, shock resistance, heat resistance change performance aspects have significantly improved. At 20 ℃ storage at room temperature for two years, without charging in operation.

To adapt to the environment (temperature).Can be in to 40 ℃, 65 ℃ temperature range use, especially the low temperature performance is good, suitable for the north cold area. Seismic performance is good, can be used in all kinds of bad environment safety. Without being limited by the space, can be operated in any orientation.

Use of quick and convenient, as a result of the monomer battery internal resistance, capacity and floating charge pressure good consistency, so no equalizing charge, also need not often maintenance.

The page contains the contents of the machine translation.