Three tips for dealing with the hazards of inconsistent lithium batteries

Batteries performance differences are formed in the process of production, and it may deepen during use process. The cells in the same battery pack, the weaker, the constant is, and the quicker, the weaker is. Parameters of discrete degree between monomer battery increase as the degree of aging.

Power lithium battery, has been firmly occupy the position of electric vehicle power supply river lake eldest brother. Long service life, high energy density and great potential for improvement. Security can change the energy density can continue to rise. Legend in the foreseeable period (about 2020 years or so) can catch up with the battery life and performance and price ratio of the fuel car into electric cars * a mature stage. However, the lithium battery also have the trouble of lithium battery.

All aspects of the situation in view of the lithium battery, spectral electronics customers often ask some technical problems, we for lithium batteries made answer:

1: why most lithium-ion batteries are small

We see the lithium battery, cylindrical battery, soft package battery, square batteries, generally looks handsome, completely can't find the traditional lead-acid battery so big, is this why?

High energy density, lithium batteries are often not designed the large capacity. Lead-acid battery energy density in 40 wh/kg, and lithium battery, has more than 150 wh/kg. Increase of concentration of energy, the requirements for the safety of a rising tide lifts all boats.

First of all, only high energy lithium battery, met an accident, causing thermal runaway, sharp reaction inside the battery, a short period of time, too much energy is released, is very dangerous. Especially in security technology, control capability is not enough to fully, the capacity of each battery should be restrained.

Second, the lithium battery shell wrapped up the energy, once appear accidental, firefighters, fire extinguishing agent can't reach, powerless, can only at the scene of the accident when the isolation, President of accident battery self-reaction, energy burnt out.

Of course, for security reasons, the current lithium battery has multiple security approach is designed. Take cylindrical battery for example.

Internal reactions beyond the normal range, relief valve, when the battery temperature rise, and accompanied by generation reaction gas, pressure to meet the design value, the relief valve automatically open, drain off the pressure. A moment of relief valve to open, the battery failure completely.

Thermistor, some batteries configuration thermistor, once appear, over current, resistance after reach a certain temperature, resistance, loop current decline, to prevent the further increase of temperature.

The fuse, batteries with which has the function of over-current fuse, once appear, over-current risk, circuit disconnect, prevent malignant accidents.

Solve the inconsistent harm the three secrets of lithium-ion batteries

2: the lithium battery consistency issues

Lithium battery can't make a big, only have to set up numerous small batteries, interest makes toward one place, sincere cooperation, also with the electric car fly up. At that time, you need to face a problem, consistency.

Our everyday experience is, two dry cell, is negative, the flashlight can shine, who CARES consistently inconsistent. While the large-scale application of lithium-ion batteries, the story is not so simple.

Lithium battery parameters of inconsistent mainly refers to the capacity, internal resistance, open circuit voltage of inconsistencies. Inconsistent batteries and used together, can appear the following questions.

Capacity loss, batteries, battery monomer composition, capacity in line with the principle of "bucket", that the capacity of batteries with poor * to determine the ability of the whole battery pack.

In order to prevent the battery overcharge discharge, battery management system of logic so Settings: discharge, when * monomer voltage reach discharge cut-off voltage, discharge the battery to stop; When charging, when * monomer voltage reach charge cut-off voltage, stop charging.

Take the example of two batteries in series. A battery capacity, 1 C, the other a capacity of only 0.9 C. Series, by the same size of current two batteries.

Charging, small capacity battery must first fill, achieve charge cut-off condition, system no longer continue to charge. Discharge, small capacity battery must be first all the available energy, light system stop discharge immediately.

In this way, the capacity of the small batteries in full all the time, large capacity batteries has been using partial capacity. The battery capacity is always part of the idle

Life lost, similar to the life of the battery pack, decided by the life * short that batteries. Great possibility, short life * batteries, the capacity of small batteries. Small capacity batteries, every time is filled, with output too hard, most likely * reach the focus of life. Batteries life end, a set of batteries, welded together with dies a natural death.

?Internal resistance increases, the different internal resistance, and current through the same internal resistance big batteries calorific value is relatively more. Battery temperature is too high, cause degradation speed, resistance will rise further. Internal resistance and temperature rise, form a negative feedback, make the high internal resistance batteries acceleration deterioration.

The above three parameters, is not completely independent, aging degree deep cell internal resistance is bigger, also more capacity attenuation. Separately, just want to clearly stated their respective influence direction.

3: how to deal with inconsistencies

Batteries performance, are formed in the process of production, in use process. Within the same battery batteries, constant is weak, the weak and accelerate the weaker. Parameters of discrete degree between monomer batteries, increase as the degree of aging.

At present, the engineer shall monomer batteries, mainly from three aspects to consider. Thermal management after monomer battery sorting, grouping, a small battery management system to provide the balanced function.

sorting

Different batches of the batteries, theoretically not used together. Even if the same batch of batteries, also need to be filtered, the parameters of relatively concentrated batteries put in a battery pack, the same battery pack.

The purpose of separation is similar batteries of the parameter is selected. Separation method, have been studied for many years, divided into two types: static and dynamic separation.

Static separation, in view of the open circuit voltage of batteries, internal resistance, capacity characteristic parameters, such as screening, selection of target parameters, the introduction of statistical algorithms, set the selection criteria, * the same batch of batteries is divided into several groups.

Dynamic filter, it is in view of the batteries in the process of charging and discharging of features to filter, some choose to constant current constant voltage charging process, some selection impact pulse charging and discharging process, some contrast of the relationship between the curve of charging and discharging.

Movement in combination with separation, made preliminary static screening group, on the basis of the dynamic filtering, which divided the group more, screening accuracy is higher, but the cost will increase accordingly.

Here is a small reflects the importance of a power lithium battery production scale. Large shipments, making factory can undertake more sophisticated sorting, get closer to the performance of the battery pack. Grouping if production is too small, too much, a batch cannot be equipped with a battery pack, it is a good method also is unable to put to good use.

Thermal management

For internal resistance inconsistent batteries, heat is not the same problem. The addition of thermal management system can adjust the temperature of the battery pack, make it keep in a smaller range. Temperature rise of the generated heat more batteries, still on the high side, but not with other batteries fall behind, degradation level will not appear obvious difference.

equilibrium

Voltage of the batteries of the monomer, some batteries, always ahead of other batteries, * reach the control threshold, cause the entire system capacity is smaller. In order to solve this problem, battery management system (BMS balance function is designed.

A secondary batteries charge cut-off voltage first to arrive, and the rest of the batteries voltage obviously lag, the BMS starting charging balance function, or resistance, put off the high voltage part of batteries, battery, or the energy transfer and in low voltage batteries. So, charging by conditions were lifted, start charging process, battery pack into more power.

Until now, the inconsistency of batteries, is still the important domain of industry research. Batteries energy density high, meet inconsistencies to sweeten battery pack ability will also be discounted.

The page contains the contents of the machine translation.