How much do you know about rebuild battery packs lithium-ion

Lithium-Ion batteries are another kind of rechargeable battery, which is rapidly turning into a mainstream decision for every electronic gadget. The reason behind its popularity is that it has a few focal points which make it perfectly suitable as compared to NiMH and NiCad. With lower self-discharge, high capacity and no memory impact the Lithium-Ion battery is the most appropriate decision of battery.

You likewise get more charge cycles before a Lithium-Ion battery will begin to create issues. Obviously, you do pay for these advantages as Lithium-Ion batteries are typically more costly to purchase than NiMH or NiCad batteries.

While, in the case of reconditioning Lithium-Ion batteries, some additional consideration and care should be taken. The electrolyte inside a Lithium-Ion battery is ignitable and the cell itself pressurized. So, remember this and make sure to consistently wear security glasses while working with batteries.

The advantages of reconditioning lithium-ion batteries

There are lots of benefits to reconditioning your lithium-ion batteries. while some of them are as follows:

1.Reusability

One of the major advantages of reconditioning your lithium-ion batteries is reusability. Most of the time it happens that when a battery becomes dead, people throw it away, while with the help of lithium-ion reconditioning, you can again make it useful for your gadgets.

2.High Energy Density

Another major advantage of reconditioning lithium-ion battery is high energy density. With the passage of time, the energy density of a battery decreases, but when you recondition the lithium-ion battery, you gain the same energy density as you had experienced before.

3.Cost-Effectiveness

Another most important advantage of reconditioning lithium-ion battery is cost-effectiveness. If you recondition the dead battery instead of purchasing the new one, then you will save a lot of amounts to spend.

How to find battery rebuilding service

Finding battery rebuilding service is not much difficult. You will get tons of battery rebuilding services online. You just have searched for them online and contact any of them that you find suitable for your battery type and your budget. Contact any of them and get your battery rebuild.

Well, it is recommended that instead of getting any kind of battery rebuilding service,  recondition your lithium-ion battery by yourself because it is not the task that you cannot perform at all, while you have to take some precaution in this process like:

· Wear safety glasses

· Perform the procedure at any safe place where is no ignitable substance around

· Implement a perfect indoor safety system

Lithium-ion battery reconditioning procedure

The Lithium-Ion battery reconditioning procedure includes some of the steps including:

1.Take the Voltage and Shock the battery

The very initial step is to take for lithium-ion battery back rebuilding is voltage reading with your voltmeter. Lithium-Ion batteries have a supposed rest mode which is dynamic if you channel the battery an excessive amount. So if the battery has released inside the gadget you were utilizing it for and it was left to release much further then this can prevent the battery from being charged once more. So for instance, if your Li-ion battery is appraised at 3.7v and the voltmeter appears under 1v and the battery won't acknowledge a charge, you may have this issue. The uplifting news is you can fix it by reconditioning the battery.

To do this, you have to take another healthy battery appraised at a similar voltage as the dead one and place them in the circuit. So get your crocodile clasps and use them to interface the batteries together, Also go positive to negative with the two links so you have a working circuit. Presently you need to leave the batteries and screen them for 10 to 15 minutes. Watch out for any indications of harm and ensure the batteries are not getting excessively hot.

At this point, take a voltage reading of the dead battery. You should find that the dead li-ion battery has a lot greater voltage and will acknowledge a charge.

Another method for doing this is to utilize a USB cable. That cable should be that cable which you don't use Since you are going to cut an end off of it. You need to remove the littler end of the cable, The one that fittings into your gadgets. At that point play the opposite end into your computer.

Cautiously contact the red wire on the positive terminal of the battery and the dark on the negative. Keep them set up for some time and make a point to monitor the battery consistently.

Continue testing the voltage of the battery until you see a better than average improvement. At that point, you can proceed onward to the second step.

2.Give the battery Full Charge/Discharge

After that, you have to plug the battery into the Lithium-Ion charger and keep it charging until it completely charges. This may take almost 3 hours relying upon what kind of Lithium-ion battery that you are rebuilding. You are then going to need to discharge the Lithium-ion battery once more. If conceivable, then you should do this in a gadget that is going to put a substantial burden on the battery. like a LED light.

3.Take the Discharged Battery and Freeze It

At last, you need to seal your Lithium-Ion battery in a water/air proof pack and place it in the cooler for around 24 hours. Ensure there is no dampness in the case with the goal that the battery does not get wet. The following day when you remove your battery from the cooler you are going to need it to defrost first before you do whatever else. So, leave it for 6-8 hours to return back to room temperature.

After this, you need to completely charge the battery in your charger and you should see some good improvement in its performance. It will presently take a charge again and ideally last longer between charge cycles.

Well, above has described all the aspects of lithium ion battery rebuilding. So, consider all of them and make sure to recondition your battery in a better and safe way.