Deep Cycle Batteries Will Not Fully Charge- Overcharging And Judgement

Although the deep cycle batteries are not so widely used, they still have some of the best applications in terms of practicality. Where the user base of these batteries is fairly small, people keep on facing different issues regarding these batteries. One of the biggest issues is about the charging of these batteries.

Most of the time people are unaware if they are efficiently charging these deep cycle batteries or not and if they are overcharging their batteries or not. If you are also one of them, then you will get the answers to almost all of your questions here.

Can you overcharge a deep cycle battery?

Yes, the deep cycle batteries can be overcharged. The amps that are used for charging these batteries decide whether the battery will be overcharged or not. On top of that, the charger that you are using to charge the batteries and the charging method being used to charge the batteries speaks a lot about the overcharging of the deep cycle batteries.

So, when you overcharge these batteries you may face a lot of issues. Here we will elaborate on a few of them.

The consequences that you have to face for overcharging the deep cycle batteries.

3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature：-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate：3C

READ MORE

Here we have discussed some consequences of overcharging the deep cycle batteries.

?Overheating Issue

The very first problem that you will feel while you overcharge the deep cycle batteries is that the battery will be overheating. This will not only be done during charging the batteries, but it will also happen when the battery will be used. Altogether this emission of heat from the battery will have severely negative effects on the performance and the life of the battery.

?Grid Corrosion

Although you will be unable to see this, when you overcharge the deep cycle batteries, these batteries get their grids damaged. When this grid is damaged the performance of the battery is significantly decreased.

Along with the performance of these batteries, the life of the batteries is also decreased.

With all of these problems for the performance and the life of the batteries, it is clear that even if you can overcharge these batteries, you should never overcharge these batteries.

How do you charge a completely dead deep cycle battery?

Although overcharging is an issue that can easily be resolved, charging the batteries is an issue that cannot be resolved that easily when the battery is dead. If you are trapped with a dead deep cycle battery.

Here we will tell you how you can retarget that dead battery without a step by step guide.

The step by step guide on how to charge a dead deep cycle battery.

This is the step by step guide to charge the dead deep cycle battery.

1.Gathering the equipment.

The first step here will be to get all the things that are required to recharge the dead deep cycle battery. The materials that you will require are listed below.

?A battery same as the dead battery but in good health.

?Voltmeter.

?Jumper cables.

?Deep cycle battery charger.

2.Connect the batteries.

The second step will require you to connect the batteries in parallel. After you have connected the batteries, you will have to connect the charger in parallel as well. To stay safe and avoid sparks, make sure that you connect the positive wires at first and the charger is off all the time.

3.Charging the batteries

Now you can start the charger. As the batteries are connected in parallel, the healthy battery will be smoothly charging the dead battery. The whole process of charging a dead deep cycle can take up to 5 hours but it is good that you keep checking the battery for its temperature and voltage.

If the battery is very hot, you must remove it from the charger. You must wait for the battery to at least reach 10.5 volts and then you can charge it separately.

Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

READ MORE

How do you know when your deep cycle battery is fully charged?

So now that you are charging your deep cycle batteries by yourself, it is very important to know when to stop. Most of the people do not know about this and they unintentionally overcharge their deep cycle batteries. Here we will tell you how you can tell that the battery is fully charged or not.

Intelligent chargers will tell you.

As the world has advanced a lot in the field of technology, new and advanced chargers are being made every other day. The chargers that are used to charge the deep cycle batteries are also not very advanced and intelligent. It is because of the use of the latest technology and hardware in these chargers. When you are charging the batteries with these chargers.

These chargers not only tell you when the battery gets full, but they also turn the charging off intelligently. This not only saves a lot of power, but it also is healthy for the batteries as they are not being overcharged.

How you can manually check if the battery is null or not.

For some users, getting the intelligent chargers is not the right option. This is the reason why some people opt for the traditional chargers and use them at lower amperes. This has no negative effects on the life of the battery as you are not using higher amps. The only problem that you might have to face is the problem of not knowing if the battery is charged or not.

To check this, you can use the voltage meter and check the voltage of the battery. If the battery is showing 12 volts or above, then it is almost fully charged. This will be a great time to remove the battery from charging.

Conclusion

With the applications and usability options of the deep cycle batteries, we can say that these batteries are the future of battery technology where performance is required with battery timing. Here we discussed some interesting yet necessary information to help you with the deep cycle batteries.