Nov 10, 2020 Pageview:480
Although most of the batteries we use these days are maintenance-free. This is all because of these batteries being dry or leak proof. When these acid batteries are now being made completely sealed where there is no hole to check to add any liquid but there is only one hole for the gases to come out.
But there are still some batteries that need maintenance and the batteries ed fluids inside them.
Here we will discuss these batteries and the significance of fluids inside them.
The acid batteries also known as the non-dry batteries need something that can help in the process of electrolytes happening inside the battery. This is the liquid that is known as the electrolyte of the battery and it is also called the battery fluid.
However, the electrolyte is not only one thing, but it is a combination of an acid with a special type of water. This combination of the liquids is known as the battery fluid.
So, there are two main components inside the battery. One is the sulfuric acid while the other one is the water. Although the sulfuric acid is only added to the batteries when they are charged for the very first time and it is not added to the batteries when they are used regularly. On the very first-time distilled water is also added to the batteries to dilute the sulfuric acid.
If the batteries are in the need of some maintenance, the sulfuric acid is not added as only distilled water does the job unless in the worst case otherwise. Other than these liquids, no other fluids are recommended for the batteries because they are not suitable for the plates of the battery.
The pros of using these fluids in your car battery.
There are a lot of benefits of using these fluids in the battery. Some of them are mentioned below.
?When you use the fluids in the pure form, the battery performance is increased as the process of electrolysis is done in a better way.
?If you use only the recommended fluids, the battery life will increase.
This is one of the most common questions about acid batteries. It is because most of the cars have acid batteries in them and people are looking to take good care of their car and its batteries. That is why most of the people are asking about the level of the water to maintain in their car. So, here we will discuss all about the level of water inside the car battery.
The best level of water to maintain in your car battery.
If you are looking to maintain the level of water in your car battery, the best level is when no plates are getting above the surface of water. Additionally, you must not overfill the battery as this will have consequences for the battery.
So, the lowest level of water is when the plates are covered, the highest beneficial level of the water in the battery will be when the water is almost 2 centimeters away from the battery. However, this might vary from battery manufacturer and size of the battery. So, you must consider the manual of the battery to look for the exact amounts.
The pros and cons of maintaining the water level in your car battery.
Pros.
?When the battery water level is maintained, the car battery performance is increased.
?Marinating the battery water level means that your battery plates are not running while being dry and it will increase and preserve their life.
?Keeping the water level maintained in the car battery means that you will not have to face emergencies regarding starting your car.
Cons.
?Running the battery with dry plates will permanently damage them. This will not only decrease their performance, but their life as well.
?The average and performance of the car will decrease.
?The electric components of the car will not perform well, and they will also be at the risk of getting damaged because of the bad battery.
The way you top off the car battery fluid has significant effects on the performance of the battery. So, here we will discuss the best way to top off the battery fluids for different battery kinds.
For the New Batteries
For the new batteries, it is very important to top off the fluids in the correct way. It is because this will be the deciding factor for the performance of the car battery and also for its life. So, the perfect way of topping off the battery fluids for the new batteries is that you put the mixture of sulfuric acid and distilled water in the batteries.
Here the fluid is only covering the top surface of the battery plates. Now you will charge the battery and once the battery is fully charged, you can add more distilled water unless it reaches the max water level.
A great thing about most of the batteries is that they have a water level indicator for the max making it less accidental to overfill the battery with distilled water.
For the Old Batteries
The used batteries on the other hand do not need that much attention because they have already got the push start to their life. However, the maintenance of the batteries is significantly important. It is because if the batteries are not cared for properly, they will start to lose their performance quality and their life will start to decrease as well.
So, it is a good practice that you keep track of the water level by checking it after every week or two. When you feel that the water level is getting lower, you can fill up to the max with some distilled water.
The batteries that are not labeled as non-maintenance batteries need a lot of care because their care will keep them performing well while preserving their life. So, here we discussed some facts about the battery fluids and how you can care for your batteries while you keep the level of fluid in the battery managed.
Leave a message
We’ll get back to you soon