22 Years' Battery Customization

Trickle Charging Car Batteries- Introduction, Methods And Charging Hour

Jan 23, 2021   Pageview:676

If you are storing a car for a long time, maybe you're going on an extended holiday, or perhaps you're not driving a car in the winter, so it's a must-have to have a trickle charger, so you don't have to struggle with a dead battery when it's time to back on the track again.

This guide has everything that you wanted to know about trickle charging car batteries. So what are you waiting for? Read on!!

What Is The Best Trickle Charging Car Battery?

The term 'trickle charger' technically refers simply to a battery that allows you to charge at low amperage. It should be remembered that your alternator charges the battery of your car continuously. That said, you may not run your car regularly. In this instance, you're going to need a trickle charger.

You can attach the charger when you store your vehicle and expect a steady stream of fuel. This way, even though you rarely use the engine, the energy will not be depleted. You will not have to deal with a dead battery at the most unexpected and inconvenient moment.

"Now the next thing is, "How to choose the best trickle charger for your battery?”. There are a lot of trickle chargers out there, as we can see, and you really don't know which one is the right for your request? Here are a few things to ponder when picking a trickle charger:

1. Engine Size

The size of your car's engine is the first thing you can keep in mind. If your car is with a big engine, a bigger battery would be required, so you need to buy a powerful charger for the battery. Therefore, make sure this one is appropriate for the size of your car before purchasing a trickle charger.

2. Battery Type

In buying a trickle charger for your vehicle, learning about the type of your battery is very critical. You should know that all sorts of battery trickle chargers work with lead acid batteries, while gel or calcium batteries work with particular chargers only.

3.2V 20Ah Low Temperature Square LiFePO4 Battery Cell
3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature:-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate:3C

How Do You Trickle Charge A Battery?

If you own a car, it's probably your lifeline to get to and from work. Regularly, the battery is being charged. Some vehicles, however, are more used to working as a hobby. For most of the year, they sit in a garage. It is more of a struggle to keep these batteries charged. The trickle charger resides with your power solution.

Learn how to use the car's trickle charger so that it's ready to go when you are!!

1. Set The Power Specifications

While a car battery is relatively standard for power specifications, it is always ideal for checking the voltage and amperage leaving the charger before any connections are made. To set it to the car battery's exact numbers, use the switches and buttons on the trickle charger.

Arrange the values to the middle of the battery's recorded range. There can also be any fluctuations in a safe area. Because of the chemical reactions involved, overcharging a battery contributes to harm and potential fire.

2. Position Your Vehicle

The vehicle can not be shifted until the trickle charger components of the car battery are attached. Set the vehicle on a permanent location; it may be located on a carport or garage.

During the trickle process, be conscious that some gases can emanate from the system. That fact is perfectly normal. Although the fumes should not be concentrated in an enclosed room. To prevent any flammable hazards, check that the vehicle's area has some ventilation.

3. Ground The Charger

If you've ever checked a car battery before, you know the significance of the ground. This negative side of the circuit provides a pathway for an electrical surge if one is present.   In essence, it's a protection valve for every battery.

Before hooking it up with the battery, you just need to ground the charger. With the power source, a grounding clip is usually included. Align it to a clean part of the structure of the vehicle. In this case, you'll need to examine the undercarriage. During the trickle phase, the good ground can decrease the risk of electrical problems.

4. Clip The Connectors Onto The Battery

Locate the red and black clips from the charger. Keep the red clip and attach it to the battery with the positive terminal. Confirm that the clip holds the terminal well. It's not supposed to feel loose or look unstable.

On the battery, align the black clip to the negative terminal. Also, determine its tight connection. At this point, do not touch any portion of the wire or battery. The power that the components are about to move through will give the battery a long life without any shorts.

5. Plug Into Power

The whole system should be safe enough for power to be plugged in now. Verify that the off mode of the charger is set. You don't want to start the process of power-up just yet. Attach the charger's power cable carefully to a nearby socket. Take a final look at your settings. Every connection should be firmly in place.

On the control panel, switch your charger on. You should light up your fixed voltages and amperage, too.

6. Watch The Setup

Pay attention to the charger and battery. There should be no sign that power is flowing, such as sparks or fire. As mentioned in the description, a  trickle charge should act the same. As the car remains in storage, a small amount of power will continuously flow to the battery.

Maintain an eye on the system during the first week of charging. A check every month, if everything looks normal and safe or so is practical. Whenever you're ready to drive your car again, your battery gets a full charge.

Low Temperature High Energy Density Rugged Laptop Polymer Battery 11.1V 7800mAh
Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

How Long Does A Trickle Charger Take To Charge A Car Battery?

Generally, it takes up to 2 days for trickle chargers to charge a car battery to the full amount. Generally, a trickle charger uses 1-2 amps only, so the operation is much slower than a higher-amperage charger. The best thing about the mechanism of trickle charging is that the battery will not overcharge by mistake. Owing to a high volume of power and voltage, it also stops the battery from potentially overheating.

You need to read the spec sheet and probably purchase an automotive battery tester to see how much your battery has left to decide how much time it will take to trickle charge your vehicle.

*
*
*
*
*

Leave a message

Contact Us

* Please enter your name

Email is required. This email is not valid

* Please enter your company

Massage is required.
Contact Us

We’ll get back to you soon

Done