22 Years' Battery Customization
Feb 25, 2021 Pageview：616
Are you tired of your phone's battery behaving strangely, and you probably think that it's time for a new phone? Although this isn't always the case. Maybe you need to calibrate your battery. If you are unsure, What is the calibration of the battery, and does it work? No worries. We have got you everything from battery calibration to reset your phone battery. What you need to do is scroll down and first know What is calibrating a battery?
The Android operating system has a function called Battery Stats, which considers the battery capacity when it's empty or full. The concern is that sometimes it gets corrupted and ends up visualizing information that isn't authentic; for example, it induces the phone to turn off before it reaches 0 percent. Calibrating your Android battery merely means getting the Android OS to correct this data so that it reflects your actual battery levels again.
It's crucial to understand that you can't calibrate the battery itself: after all, it's just a cell that holds power and discharges. However, if you are unsure and wondering, is battery calibration necessary? So let's get into it and know everything.
First Thing First
Batteries are bound to see a drop in performance over time, so it can be essential to calibrate your battery. It's just simple physics: the cathode wears out as the ions flow between the anode and the battery cathode. This tends to happen even if you leave your phone in a cupboard. And this applies to all the batteries, from your car to your phone.
However, this decline in performance is rarely as drastic as your phone could make it happen. You can see claims that batteries can last for "only" 500 charging cycles, but like any device, the output will vary from battery to battery and even between batteries of the same kind.
It often relies on your charging habits; if you charge your phone at 100% and then don't use your phone too much, causing it to run down to almost zero, you're going to have very different battery life from a phone you're regularly using a full-blown screen. Calibration will "clean the decks" and make it easy to do this by encouraging your phone to figure out what's 0 percent and 100 percent.
Preferably, you should calibrate your battery every two or three months after your phone has been exposed to intense cold or extreme weather, or whether your phone has the following symptoms:
●Showing a full charge, then all of sudden falling low.
●Stick on one percentage charge for a prolonged period.
●Showing the very same percentage of charge after both charging and discharging.
●Discharging more rapidly than anticipated.
●Not charging properly.
●You need to charge your phone several times a day, or you need to get your phone plugged in during the day.
●Reporting problems with the battery via a pop-up, even though the phone is running perfectly otherwise.
Great power comes with responsibility! And in the Android community, there's a massive loss of battery life with great power. So here we have two solutions for you. So, without any ado, let's have a look at them :
Method 1: Battery Calibration (Root Required)
This choice is straightforward because your phone is already rooted. If your phone isn't rooted, go ahead and root your system or continue to Method 2. If your phone is already rooted, follow these simple steps:
●Discharge your phone absolutely until it turns off.
●Turn it on and make it shut down again.
●Connect your phone into a charger and, without turning it on, let it charge until the on-screen or LED indicator is 100 percent.
●Disconnect the charger.
●Switch the phone on. It's possible that the battery meter won't say 100 percent, so plug the charger back in (leave your phone on) and keep charging until it says 100 percent on the screen as well.
●Disconnect and restart your phone. If you don't say 100 percent, plug the battery back in until it says 100 percent on the screen.
●You want to replicate this cycle until it says 100 percent (or as close as you think it's going to get) when you start it without being plugged in.
●Now download the Battery Calibration software, and before you start it, make sure your battery is 100 percent again, and then restart.
●Immediately open the app and recalibrate the battery.
●If you've calibrated your battery, release it down to 0 percent and let your phone turn off again.
●Charge the battery completely one more time without any disturbance, and the android system's battery percentage will be reset.
Method 2: (No Root) Physical Battery Calibration
This option is still straightforward, but at the same time, it takes a little more time. If you've got a rooted system, Method 1 is undoubtedly the way to go. However, if you don't know what "root" implies, adhere to Method 2.
●Discharge your phone absolutely until it turns off.
●Turn it on again, and make it turn off.
●Connect your phone into a charger and, without turning it on, let it charge until the on-screen or LED indicator is 100 percent.
●Unplug the charger.
●Switch the phone on. It may be possible that the battery meter doesn't show 100%, so what you need to do is put the charger back in and keep charging until it says 100 percent on-screen as well.
●Unplug and reboot your phone. If it doesn't say 100%, plug the charger back in until it says 100 percent on the screen.
●Repeat this process until it says 100% (or as close as you think it's going to get) when you start it rather than plugged in.
●Now, allow your battery to run down to 0 percent and let your phone turn off again.
●Completely charge the battery one more time without delay, and you should have reset your Android system's battery percentage.
Batteries are the most dramatic object, so it should be taken the utmost care to move them to an infinite or long-lasting state. Above are some key points related to the calibration of the battery and why it is essential. Hopefully, this guide will help you enrich your knowledge !!!!
Leave a message
We’ll get back to you soon
