Wheelchair Battery Charger-Charging,Reading and Testing

Mobility equipment is designed to function with backup power for easy movement. As an equipment that is required to help you with your movement, it is expected that it should be available for use, otherwise what will be the usefulness. So when it comes to ensuring your battery works as expected, there are a couple of things you need to be watching out for. You will need to know how it can be charged, read, and tested.

Fortunately, this post will be letting you know all that you are supposed to know about wheelchair battery charger. This information is very important because it will allow you maximize your wheelchair regarding how it is used. So let us begin with the first thing you need know in this regards;

How do you charge wheelchair battery?

The first step to annihilating the lifespan of your battery is by charging your wheelchair battery anyhow you deem fit. It is about the fastest way to kill any wheelchair battery. Thus, you must first learn how to charge your wheelchair battery in an appropriate manner. That is because if you do it accordingly, the battery will stand the chance of lasting longer. Your wheelchair is not like your mobile phones or some other straightforward devices that you can charge anyhow.

You can follow the below instructions to get your wheelchair battery charged with one off-board charger;

• Make sure you move the wheelchair to any standard mains electric outlet.

• Make sure you turn off the controller power and set the motorized wheelchair to drive mode.
  

• Off-board charger should be plugged in the controller’s off-board programming socket.
  

• Have the off-board charged plugged in the electric mains outlet.
  

• You need to unplug the off-board charger from the controller and electric mains supply outlet immediately you notice the battery is full.
  

The motorized wheelchair battery charger does come with LED indicators to let you know the charging status at specific times. Here is what you should expect;

• Charging activated

• Charge in progress
  

• Fully charged
  

If you happen to have subjected your wheelchair battery for an extended period of more than 24 hours and it is yet to indicate a full charge, have it unplugged from the electric mains outlet and send it back to whoever you bought it from. You are not supposed to charge it for that long.

We started by saying, this one is not like your smartphones that can be charged anyhow. There are some things you are to consider when charging your wheelchair battery for it to deliver optimally. Those factors will be discussed in the section below;

• You need to ensure your wheelchair battery is fully charged before using it for the first time. This is essential in raising the battery performance to about 90% of its highest value.

• The power wheelchair can be used everywhere in your home; start using it slowly till you are used to the whole environment. After which, you can start using it at a high speed.
  

• Charge the battery to its fullest for about 14 hours one more time, and then make use of it again. At this stage, the battery will be sure of delivering over 90% of its potential.
  

• After doing this for like 4 or 5 times, the battery peak performance will be gauged at 100%, which will enable you use it for longer periods.
  

3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature：-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate：3C

READ MORE

What should a battery charger read when charging?

Knowing how to read a battery charger reading is critical to how you charge your wheelchair battery. That way, you can easily know when to do the usual charging or when to engage deep charging cycles. Understanding the battery charger readings will also depend on whether you are using the contemporary digitally controlled charger or the conventional analogue chargers.

For the digitally controlled chargers, you shouldn’t have any troubles understanding the charging status. It has three indicators which are used to show when it is on, charging, and when charging is complete. There is nothing scientific about this. All you have to do is watch out for which of the LED lights are active.

For the analogue controlled chargers, it is a bit different. You need to understand a few basics to get this right. In this instance, you will need to know when the battery is charging and when it has charged to its capacity. In many chargers, you will see two sets of readings; one that indicates the level of current charging of the battery (from 1 – 12), while the other reading shows you the percentage the battery has charged up to. This one is also easy to understand, if only you keep your eyes on the needle in the meter.

Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

READ MORE

How do you test a battery charger on a wheelchair?

Everyone wants to ensure they are using a battery charger that works perfectly for their wheelchair. It is the only way to ensure you are not using a charger or battery that has any issues. This section of this post will be treating you to a quick measure you can take to ascertain the status of your charger.

First, connect the wheelchair battery charger to an electrical outlet and make sure it is charging. You can leave it to charge over the night if you don’t want to monitor it all the time. The former level of the battery should be noted before you begin charging.

Second, disconnect the wheelchair battery charger from the power socket, and note what the reading is now saying. The battery ought to be indicating a fully-charged status at this point. Otherwise, there could be a slight issue with the charger.

Some people still remain unsure after going through all these procedures. If you belong in that category, you could use some extra help – charger analyzers for wheelchair batteries. This one should do the trick for you. Get any battery charger analyzer to assess your charger status.