Calibrate HP Battery – Introduction and Solution

There are a lot of laptop manufacturers in the world and HP is one of the world's leading brands as a lot of users trust and use their laptops. Although being one of the best, there are sometimes some issues with these laptops as well which is not a big deal.

One of those issues is battery performance. As the laptops use lithium-ion or lithium-polymer batteries, it is necessary to calibrate them after some time to keep the battery performing well.

3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature：-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate：3C

READ MORE

Calibrate HP Battery Manually

Although the HP laptops come with an amazing battery calibration program built into the laptops where you can calibrate the battery without doing a lot more than a few clicks. You may feel that the calibration program is not working as it should work and the final result after calibration is done is not that good.

In this case, there is not a lot that you can do as you can also go for the manual HP battery calibration. All you need to calibrate the HP battery manually is to follow this step-by-step guide.

The Step-by-step Guide to Calibrating HP Battery Manually

Calibrating the HP battery is a matter of only a few steps that you can easily do right from the Windows operating system. The following are the steps that you need to follow to calibrate the HP battery manually.

1.Start the laptop and go to the settings application on the computer

2.In the settings application, you will need to go to the “System” tab and from there you will need to go to the “Power & sleep” option

3.Here you will see the Related Settings title beneath which there will be the option “Additional power settings”. Click on that

4.There will be a new screen in front of you and on the left side, there will be a “Change when to turn off the display” option. You need to click on that and from there you will need to look for the “Change plan settings”

5.From the next screen that appears you will need to go to the “Change advanced power settings”

6.Select battery and then click on the “Critical; battery Action” option. You will also need to set it to hibernate and then set the critical battery level to 5%

7.After applying and saving all of these settings you will need to close all the applications and remove the charger from the laptop as well.

8.Use the laptop to discharge the battery to the point where it shuts down itself

9.Wait for a few hours and then plug the charger into the laptop to charge it to 100% while it is turned off

In this way you can easily calibrate the HP battery manually

Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

READ MORE

Test and Calibrate HP Battery

Do you know that HP provides its users with an amazing program for testing and calibrating the battery on their laptop computers? While the maximum capacity of the batteries inside the laptop change over time, the performance reduces as well.

However, other factors make them perform even worse and those factors can easily be resolved by testing and calibrating the battery. So, here is all that you need to know in this regard.

Testing the HP Battery

Testing is the process that checks the condition of the battery to know the expected performance of the battery according to the charging level of the battery. When you have a HP laptop you can use the HP PC hardware diagnostics method for easily testing the laptop battery. All you need to do is to run the “HP PC hardware diagnostics” as administrator and go for the test option.

There you will need to select power and then battery check for once. The program will run for some time and then it will provide you with the results and complete test logs as well

Calibrating the HP Battery

When you are looking to calibrate the HP battery you can follow these steps to get things done:

1.Charge the laptop to 100%

2.Discharge the battery and remove the charger

3.Hold the power button for 5 seconds and as soon as the screen appears to power up keep pressing the f2 key

4.Click the component tests memory extensive test then loop until error and wait for 6 hours.

5.Now charge the laptop to 100% again and keep the charger connected for at least 3 hours if the laptop is not fully charged

All that is left is a little wait. Wait for 2 hours before using the laptop and your battery will be calibrated.

The HP Battery Won't Calibrate

There could be a case that your laptop is either very old or some other issues are going on with the laptop. In that case, there will be a lot of symptoms that you cannot about the battery needing calibration. Some of those symptoms that the battery needs calibration are the following:

The laptop shows “battery needs calibration” signs and warnings.

The battery takes forever to charge to 100%

The battery is not charging or discharging and is stuck at some percentage

The laptop battery does not provide a very long power backup time even under low load.

All of these things mean that your laptop battery has some issues, and the biggest issue would be the one where the battery won't calibrate. So, here is what you can do if the HP battery won't calibrate.

Use Different Calibration Methods

When it comes to HP laptops there are several ways of calibrating the battery. Some of the methods to calibrate HP battery are the following:

Using the HP program

Using bios method

Using manual method

If one method fails, several times then you can test using the other methods. Most probably one of them will work, otherwise, you need to see some other options.

Try Replacing the Battery

The other option here is to try replacing the battery. There are possibilities that the battery of your laptop has served its life and now it needs to be replaced. So, replacing the battery will solve all of your issues.

Conclusion

Having a laptop with a faulty battery kills the purpose of the laptop as you need a charger all the time. So, what you can do is to keep the battery in good condition. Having the HP laptop, you can easily use the calibration method to keep the battery performing well.