How to Use and Maintain Polymer Lithium Battery

Lithium polymer is the latest technology in the world of batteries. It’s a rechargeable battery featuring a soft polymer casing and a soft external pouch, as the main difference from standard lithium-ion batteries.

Also, lithium-ion batteries with gelled polymers as an electrolyte are categorized under LiPo. But in most cases, this term describes a type of li-ion battery in a pouch, and hence, lithium-ion polymer battery.

LiPo batteries are a result of constant attempts by battery manufacturers to create more stable and powerful batteries. The technology creates batteries that are lighter and more flexible than other options of lithium-ion batteries.

It is their soft shells that make them more flexible. Thus, they have become extremely popular in mobile and other electronic devices. Remote control vehicles and RVs have become more common thanks to these batteries.

Like any other battery type, there is a need for proper usage. You need to know the best conditions for your batteries to operate and ensure you get them properly.

And that is what our guide today is all about. We will show you how to use these batteries.

Disadvantage (under Normal Circumstances)

When buying batteries, it’s extremely important to understand their advantages and disadvantages. Even though LiPo batteries have so many benefits, they also come with several limitations, even when used under normal circumstances. You need to know them in order to make the best buying decisions.

3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature：-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate：3C

READ MORE

Consider the following:

It may have less recharge cycle.

Recharge life cycles are among the main factors to consider when buying a battery. You need to get something that will serve you for a long time while giving you the best performance.

Charge-recharge cycle means the number of times a battery can be recharged before it runs out of capacity. A good battery can have more than 1000 cycles.

LiPo batteries generally have fewer life cycles of about 300 to 400 charge cycles. This means it may not work for a long time, even when exposed to the best conditions.

Lower Energy Density

Energy density measures how much power a battery can give as per its size and is measured in Wh/kg. Lithium-ion batteries have a higher energy density of 100 to 250, while LiPos have a lower one of 130 to 200.

In some cases, this is an advantage, especially when it comes to transportation. However, it becomes a little less efficient when you include other factors. This is not a limitation when you get the best battery for your application.

Higher Cost

Batteries are one of the biggest investments in the world that rely on electronic devices. Consumers are often looking for the most affordable options.

Lithium polymer batteries are more expensive than standard lithium batteries. Some cost more than double the price of Li-ion batteries. Whereas this price may be justified by the improved performance and general safety, it might not be what everyone wants.

So, if you are looking for a cheaper battery, LiPo may not be your best choice. It might be a great investment in the long run, though, considering it delivers better performance than other batteries.

Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

READ MORE

Maintain Instructions (Under Normal Circumstances)

Many consumers expose their batteries to certain conditions that may damage their performance and reduce life without knowing. Maintenance is a crucial part of using any battery for maximum benefit, something that some users don’t have a clue about.

So, how do you maintain a LiPo battery to get the best results? There are different ways of doing so. Here are a few ideas to get you started.

Observe and note the run time before using.

When you get a new battery, it’s always advisable to observe and note its run time and compare it with your older battery. This is why experts say you must charge your battery fully before you start using it.

Use the battery run time to lay the foundation for comparison with other batteries. The run time will vary depending on the battery’s quality and device.

Keep an eye on the charge status of your battery.

As stated above, LiPo batteries tend to have a shorter life cycle. It can grow even shorter when you don’t use it properly.

One way of ensuring you get that performance is by constantly checking the charge status. Note how fast the battery drains under certain conditions, especially as it gets older.??

Check your battery routinely as it gets older.

A battery that is approaching the end of its estimated life can have more issues than a new battery. We have batteries explode due to poor user conditions and lack of proper care from the user. You wouldn’t want that happening to you.

Storage

Storing batteries can be a bit tricky. Most batteries come with instructions and specific approaches to proper storage, especially concerning temperature.

If you are storing your LiPo battery for an extended period, therefore, charge or discharge it to about 50% and then store it under cool temperatures. Hot conditions can lead to increased reaction inside the battery and damage it in the long run.

Charging

Another area to keep an eye on when using LiPo batteries is charging conditions. Whereas LiPo batteries are safer than standard li-ion batteries, it’s still important to follow the right procedure for your safety and to keep the battery in good condition.

Refer to the product manual about the right charger to use and the best charging conditions. When troubleshooting, use one battery to test another.

Always charge your batteries at the right temperature. It becomes hard to maintain them properly if you don’t use the right charging procedure, and it can even damage your batteries beyond repair.

Safety Standards

Lithium polymer batteries must be used properly to avoid severe damage and other issues. Here are the safety precautions to keep in mind:

LiPo batteries can cause fires, explosions, and other damage. Always check the manufacturer’s instructions for safe charging, usage, and storage.

Excessive shock or vibration can lead to battery deformation, crashing, and other damages.

The batteries must be charged with a recommended charger as they have specific charging requirements.

In short, always refer to safety instructions when using, charging, or storing LiPo batteries. Double-check the settings on your charger, keep your battery under cool temperatures, and avoid any physical damage.