The android mobile phone battery calibration method

Android phone battery calibration method tutorial

Non-root mobile:

1. Keep the phone turned on, connect the charger to charge (USB and cable can be charged)

2. After the mobile phone LED turns green, the battery is fully charged, and the mobile phone is unplugged from the charger.

3, turn off the phone, and then connect the charger, keep the cell phone into the LED lights turn green again

4, unplug the phone charger

5, the phone is turned on, then wait until the phone is turned on and fully enters the system, quickly shut down

6. Connect the charger to the phone that has been turned off again. After a few minutes, the LED will turn green again.

7. Unplug the phone from the charger and use it normally.

Cell phone battery is not durable

Mobile phone has root access:

The first method (recommended) :

1, mobile phone run out of electricity, the phone to boot, wait for natural shutdown, this step is to completely discharge

2, mobile phone to keep connection charging power supply (during the charging time of not less than 12 hours, charging can't without electricity, or you'll have to start the first step)

3, mobile phone will remain connected power supply boot into RE manager or similar tool to delete/data/system / * * battery stats. Bin this file, and then unplug the power supply, immediately restart your mobile phone

4, normal use until we run out of battery, after normal use

The second method:

1, keep the phone on, connect the charger to recharge

Explained after 2 LED turn green, mobile phone battery is fully charged, from your mobile phone charger plucked

3, turn off the phone, and then connect the charger, keep the cell phone into the LED lights turn green again

4, unplug the phone charger

5, the phone is turned on, then wait until the phone is turned on and fully enters the system, quickly shut down

6. Connect the charger to the phone that has been turned off again. After a few minutes, the LED will turn green again.

7. Start the phone and enter the recovery mode (press and hold the phone back button and power button to start), then select wipe battery stats.

The third method:

1, boot, connected to the charger, until the lights turn green

2, unplug chargers, shutdown, connected to the charger, until the lights turn green

3, unplug the charger, boot, enter the system, shut down and connect the charger, until the indicator light turns green

4, unplug chargers, the inside of the boot to recovery the advanced menu wipe battery status after restart

After the above steps, the battery calibration is completed, only 5 minutes longer than usual, but the calibrated battery is significantly different from the previous one. Before the battery calibration, you will find that the battery will be reduced to about 93% when it is fully charged. After calibration, it can be kept at 100% for several hours before it starts to decrease to 99%. In general, the battery after calibration will definitely be surprise you.

The page contains the contents of the machine translation.