Battery Rebuilding Service – App and Laptop

The batteries we use in devices like laptops, power tools, and even cars have a specific life. These batteries can perform well for a specific period and start degrading. There comes the point where these batteries stop performing as they should. However, they still have some capacity, which can be recovered by battery reconditioning and rebuilding services.

Battery Reconditioning Service

Battery reconditioning service is a service that involves recalibrating the battery system. In some cases, the computers connected to the batteries cannot read the battery correctly due to technical glitches. The result is a situation where you cannot harvest complete capacity from the battery, and for such situations, the best solution is a battery reconditioning service.

How is battery reconditioning done?

It is a simple process that involves charging and discharging the battery. When you get battery reconditioning service, your system's battery is completely discharged to 0 until the system shuts down. It resets the battery calibration. Now the battery is charged completely, and the system calibrates along with the battery.

How long does this process take?

Battery reconditioning service applies to different devices, including computers, tools, cars, etc. Since every product has a different battery specification, no standard period can be specified for this process. It is because it depends on how long your battery takes to discharge completely and how long it charge again.

Is it safe to recondition a battery?

When we use our batteries, they keep degrading, and over time, batteries lose around 30-40 percent of their overall capacity. It is the point where if you perform battery reconditioning, the battery can maintain the remaining performance for a long time. So, yes, it is safe and beneficial for the battery since you can keep using the old battery without needing a new one.

3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature：-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate：3C

READ MORE

What is the effectiveness of battery reconditioning services?

A battery that you may consider unusable may still have up to 70% of its total capacity still left in it. So, when you recondition a battery, you may regain that capacity. Thus, this battery will bring 70% of the usable capacity compared to 100% of a new battery.

Laptop Battery Rebuild Service

Battery reconditioning is an effective solution for aging batteries, but sometimes that does not work. It happens when the different cells inside a battery are not at the same capacity level. When that happens, the good cells lose their power while trying to charge the bad cells, and hence the performance drops significantly. The solution to this problem is battery rebuilding services, and below are the steps for battery rebuilding services for a laptop:

1.Opening the Laptop and its Battery

The process starts with opening the laptop to take out the battery. In older models, the batteries are removable, so the whole laptop does not need to be taken apart. Otherwise, the process starts when the laptop is opened and the battery is also opened.

2.Disassembling the Whole Battery

Laptop batteries usually consist of multiple cells ranging between 3 and even 9 in some batteries. So, the whole battery is carefully disassembled while keeping its casing intact. This part also involves disconnecting individual cells.

3.Checking Individual Cells

Now each cell is tested for voltage. For instance, a 3.7-volt battery in a discharged state must have over 2.9 volts, and if there are cells that have 2.5 volts are so, they need to be replaced or balanced.

4.Rebuilding

If the cells are good enough for balancing, they are balanced with an industrial charger; otherwise, new cells are installed, and the old ones in good condition are charged for balancing them. Now the battery enclosure can be closed, and the battery can be installed in the laptop.

Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

READ MORE

5.Calibrating the Battery With laptop OS.

The last part of this process includes calibrating the battery with the laptop's operating system, which is done using the same battery reconditioning process. Now the old battery is ready for to last months of regular usage without any problems.

Battery Pack Rebuild Service

Another thing that can get battery rebuild service is a battery pack. Battery packs come in different shapes and sizes, and they are usually made with individual cells that connect in a series configuration, a parallel configuration, or a mixed configuration. So, when those batteries go bad, rebuilding services can bring them back to life.

Who can benefit from the battery back build service?

This service can benefit anything with a battery pack inside if the internal cells are readily available. When we talk about the 18650 lithium-ion cells, the following things can get rebuild services:

Hoverboards

Power tools

DIY projects

Electric bike

Kids' drivable cars or carts, etc.

While these things can get battery rebuild services, items with single-cell batteries like a smartphone can usually not get these services, and replacement is the right option.

Top Benefits of Battery Pack Rebuild Services

Going for a battery pack rebuild brings multiple benefits, including the following:

New-like Performance

Getting the rebuild service for your old battery pack means the packing stays old, but the internal battery cells are either balanced or replaced with new ones. As a result, you can get a new-like performance with much better capacity.

Solution for Products With Replacement Batteries not Available

There are some products whose replacement battery packs are not available. If the individual cells are available, rebuilding can solve the issue. It is the best way of getting new-battery performance for such devices.

Cheaper

It is the cheapest solution for a bad battery. In most cases, cells are balanced and can work for quite some time. Otherwise, some used batteries can be added by replacing bad ones, and it keeps the whole thing cheap.

Good for the Environment

As you are not throwing away old batteries in the trash by replacing them with new ones, it is good for the environment since there will be a less chemical waste.

Conclusion

Battery rebuilding and reconditioning cannot be done at home as it requires specific tools and skills. Moreover, they vary from battery to battery, and lastly, some safety hazards make these unsafe to be done at home. So, suppose your battery-powered device is also facing major performance issues. In that case, you may go for battery rebuilding and reconditioning services since you can get a performance like new without spending the price of a new battery.