What are the advantages of Modular UPS?

The term "modular UPS" describes a UPS system that was constructed using a modular architecture, enabling simple scalability, redundancy, and flexibility. In a modular UPS, the system is made up of various power modules that can be added or deleted in accordance with the load's power requirements. Below are some benefits of using a modular UPS:

Savings on costs

The most important factor in the majority of enterprises is money, and modular systems have reduced total costs of ownership. The user can take control of modern modular UPS systems by "hibernating" or shutting off modules if the load is lower than anticipated. In addition to ensuring that each module is running as efficiently as possible, this lowers overall energy use.

Scalability

Scalability is one of the main benefits of modular UPS. Organizations can install a modest number of power modules to start with a smaller capacity and then add additional modules as their power requirements increase. This scaling feature offers versatility, cost savings, and the capacity to adjust to evolving power needs over time.

Risk distribution

A single, monolithic UPS might be viewed as its own single point of failure in contexts where reliability is essential. Single points of failure are eliminated with modular UPS systems, which disperse the risk instead. A modular UPS is made up of separate, interconnected components. The system won't be affected if one component needs to be taken away and replaced. In the majority of cases, you may replace the damaged module while the system is still operational. 

3.2V 20A Low Temp LiFePO4 Battery Cell -40℃ 3C discharge capacity≥70% Charging temperature：-20~45℃ Discharging temperature: -40~+55℃ pass acupuncture test -40℃ maximum discharge rate：3C

READ MORE

Advantages of Modular Lithium iron phosphate batteries

Compared to conventional monolithic battery designs, modular lithium iron phosphate (LiFePO4) batteries provide a number of advantages. The following are some of the main benefits of modular LiFePO4 batteries:

LiFePO4 batteries have a longer cycle life than batteries using other lithium-ion chemistries, like lithium cobalt oxide (LiCoO2). Advanced battery management systems are frequently used in modular designs to optimize charging and discharging cycles which in turn improves battery lifespan.

High Power Density: LiFePO4 chemistry provides superior power density, making it possible to provide high currents when necessary. Modular LiFePO4 batteries can therefore be used in high-power output applications like battery backups for optimum demand management or electric car batteries.

LiFePO4 chemical is thought to be more environmentally friendly than other lithium-ion batteries. It does not include any heavy metals and poses less of a threat from fire or thermal runaway. Modular LiFePO4 batteries' extended lifespan and ability to be recycled further help to minimize their negative environmental effects.

Enhanced Safety: When compared to other lithium-ion batteries, LiFePO4 is noted for its improved thermal and chemical stability. By allowing for the installation of integrated battery management systems (BMS) and thermal management systems, modular design further improves safety. Any possible problems within the battery system can be stopped from spreading by isolating and regulating the performance and safety of individual modules.

Comparison of Lithium Iron Phosphate battery and Lead acid battery

Lead Acid batteries and Lithium Iron Phosphate (LiFePO4) batteries are two popular types of rechargeable batteries, each having unique properties and performance. In this assessment, we'll look at the chemistry, energy density, cycle life, charging efficiency, features of the discharge, weight, cost, safety, and environmental impact of these different battery kinds.

Low Temperature High Energy Density Rugged Laptop Polymer Battery Battery specification: 11.1V 7800mAh -40℃ 0.2C discharge capacity ≥80% Dustproof, resistance to dropping, anti - corrosion, anti - electromagnetic interference

READ MORE

Chemistry

Lithium iron phosphate batteries, often known as LiFePO4 batteries, are a subset of the lithium-ion battery family that uses lithium iron phosphate as the cathode material. They are safer and less likely to have thermal runaway or an explosion because of their stable and strong chemistry. Lead-acid batteries have electrodes made of lead and an electrolyte of sulfuric acid. Electrical energy is produced by the reaction of lead and sulfuric acid.

Energy Density

Compared to lead-acid batteries, LiFePO4 batteries offer a higher energy density. They can be designed more efficiently and lightweight since they can store more energy per unit of volume or weight. This qualifies them for uses that call for high energy density, such as electric vehicles and portable gadgets. Lead-acid batteries have a low energy density. They are less suitable for applications where size and weight are important considerations since they are bulkier and heavier for a given energy capacity.

Life cycle

LiFePO4 batteries often have a longer cycle life than lead-acid batteries. Before encountering a significant capacity loss, they may withstand hundreds or even thousands of charge-discharge cycles. They can be used for a longer period of time thanks to their increased cycle life, which lowers the frequency of replacement. Lead-acid batteries only have a limited amount of cycles. Heavy use and deep discharges can drastically shorten their life expectancy. Lead-acid batteries typically last a few hundred cycles before their capacity starts to noticeably decline.

Efficiency of Charging

Compared to lead-acid batteries, LiFePO4 batteries offer better charging efficiency. They can accept charges more quickly, which reduces the time needed to charge. Applications that call for quick rechargings, like electric automobiles and renewable energy systems, can really benefit from this quick charging capacity. Lead-acid batteries are less efficient in charging. In particular, as they get close to full capacity, they can take longer to charge and be less effective in accepting charges.

Why do modular UPS power supplies use Lithium Iron Phosphate batteries?

In the event of a power outage, vital equipment and systems can be reliably powered by modular UPS systems. Due to their distinct qualities and benefits, lithium iron phosphate (LiFePO4) batteries are frequently used in modular UPS power supplies

LiFePO4 batteries are thought to be safer than other lithium-based chemistries in terms of safety. They are less vulnerable to thermal runaways, which is a danger that UPS systems may encounter. LiFePO4 chemistry is a recommended option for applications where safety is of the utmost importance due to its stability and heat tolerance, which lessen the possibility of fire or explosion.

Longer service life: Compared to other battery chemistries, LiFePO4 batteries have a longer service life. They often withstand over 2,000 charge-discharge cycles or more. This increased longevity lessens the requirement for frequent battery replacements and raises the UPS system's overall reliability.

Extreme temperatures are not a problem for LiFePO4 batteries because they can function well across a wide temperature range. As a result, they are appropriate for UPS systems installed in a variety of situations, including data centers and industrial settings where fluctuations in temperatures may occur.