Samsung laptop battery repair method steps

For college students, the most important and most familiar partner is the laptop, and when buying a laptop, many people will choose to buy a Samsung laptop because of the resolution and quality of the Samsung. But after using the computer for a long time, you will find that the battery of the laptop is getting worse and worse. So today, I will bring the benefits to the readers, tell you the repair skills of the Samsung laptop battery, and help you find the most original computer.

What should I do if the laptop battery is not charging or charging? The following is the corresponding solution.

Laptop battery is not charging Solution 1: Replace the battery or deep discharge.

If the battery is defective due to aging of the battery, we can only solve it by replacing the battery or deep discharge, but these behaviors may cause the battery to be damaged or unusable, so be careful before you start.

Laptop battery is not charging Solution 2: Use the software method to refresh the battery.

IBM laptops offer a "Battery Maxi Miser and Power Management" software that allows us to have a good solution for incorrect battery capacity display and reduced battery life. Running this software, the computer will automatically check and discharge the battery according to the state of the battery. When the program ends, it can be found that the difference between the actual capacity and the design capacity of the battery will become smaller (but still exists).

Laptop battery is not charging Solution 3: Use the firmware method to refresh the battery.

Some manufacturers have embedded the battery correction program into the BIOS firmware (such as ASUS), we just need to enter the BIOS to perform the battery correction program at boot time.

Laptop battery is not charging method four: use the own program to correct battery laptop battery maintenance

1. If the old version has been upgraded to the Win7 system, you can use the built-in functions of Win7 to correct the battery by entering the “Power Options” interface and selecting the “High Performance” power plan.

2. After clicking "Change Plan Settings", set all options under "Battery" to "Never" and set "Adjust Brightness Plan" to the maximum value.

3. Click "Change Advanced Power Settings" at this time, expand "Wireless Adapter Settings → Energy Saver Mode", and set "Use Battery" to "Maximum Performance".

4. Expand "Battery → Low Level Battery Power Notification" and set "Use Battery" to "Off". After saving the settings, close all applications. When the battery is fully charged, unplug the AC adapter, use the battery power to automatically turn it off, and then fully charge the battery in the off state.

It seems that there are still many ways to repair laptop batteries. It is not necessarily that the battery of the laptop has been damaged to the point that it must be replaced. Sometimes it may be affected by the system problem. Of course, the battery of our laptop is very fragile. In normal use, we should take good care of it and maintain it. Otherwise, it will lead to many problems.

The page contains the contents of the machine translation.