22 Years' Battery Customization

Attention to the Maintenance and Use of Gel Battery

Mar 18, 2019   Pageview:951

1. Keep the battery surface clean; Check the connection status of battery or battery rack regularly.

2. Establish a daily record of the battery operation and record the relevant data in detail for use.

3. Do not discard waste batteries after use, please contact the manufacturer for recycling.

4. During the storage period of the battery, the battery should be recharged regularly as required in the article.

If you need to perform discharge management on the battery, pay attention to the following points

A. Do not clean batteries with any organic solvent;

B. Do not open or remove the safety valve, otherwise, it will affect the performance of the battery;

C. Be careful not to block the vent of the relief valve so as not to cause battery explosion;

D. When balanced recharging / recharging, it is recommended that the initial current be set within O. 125C10A;

E. Batteries should be used in a temperature range of 20 °C to 30 °C, and overcharging of batteries should be avoided;

F. must keep the battery voltage within the recommended range to avoid unnecessary losses;

G. If the battery needs frequent discharge due to poor electrical conditions, it is recommended that the recharging current be set to O. 15-O.18C10A;

H. The vertical direction of the battery can be used immediately or horizontally, but it can not be used upside down;

1. It is strictly forbidden to use batteries in closed containers;

J. For battery use and maintenance, please use insulation tools. Do not place metal tools on the battery;

In addition, it is also necessary to avoid overcharging of the battery. Overcharging may vaporize the electrolyte in the battery, affect the battery life, and even cause failure. Overloading of the battery will cause premature battery failure. Overcharge and overloading may damage the load. Sun-controlled.

Sunlight is known for solar control, solar billboard design of the multi-time controller. This product has waterproof, anti-lightning strike, dust and other functions. Using PWM modulation charging function, high charging efficiency. Users can read and modify the parameters of the product through the remote control, using fast, flexible and convenient. The product uses industrial-level MCU processors and is suitable for different regions and environments; With various protection functions, and can be automatically restored, such as anti-charge protection, load open protection, short circuit protection, over current protection, overcharge protection, over pressure protection, under pressure protection, etc., do not damage electronic components.

Sunshine reputation control:

1, the use of wireless transmission communication means, can freely read and set the parameters of the controller, easy to use.

2, LED indicator instructions to facilitate users to more intuitive understanding of the system's work status.

3, all parameters can be viewed and modified through the remote control, including charging, discharge, time, power and so on.

4, the charging method adopts a mature and stable PWM pulse width modulation three-stage formula, which greatly improves the charging efficiency, protects the battery from overcharging, and extends the battery life.

5, the controller has two different working modes(optical control + time control, pure optical control, morning light), users can be set according to the system requirements.

6, with 4 hours + morning bright mode discharge settings, can set 5 different working hours, enhance the flexibility of the product.

With temperature compensation function, according to the detected ambient temperature, smart battery charging and discharge parameters to compensate.

8, the use of cast aluminum shell, and the use of professional sealant, to ensure that the product's performance is stable, waterproof high, pressure resistance, corrosion resistance, adapt to various harsh environments.

9, meets the CE Mark EMC and LVD standards.

10, according to the battery power can automatically adjust the output power, to ensure that the solar street lamp light time.

The page contains the contents of the machine translation.

*
*
*
*
*

Leave a message

Contact Us

* Please enter your name

Email is required. This email is not valid

* Please enter your company

Massage is required.
Contact Us

We’ll get back to you soon

Done