Proper Operation Method of Lithium Battery in Electric Vehicle

Operating specification for charger:

1. Determine whether the AC market power and charger input voltage match.

2. Determine whether the output voltage of the charger matches the battery voltage rating.

3. Plug the charger into the lithium battery box first, then plug in the AC power supply plug.

4. Charger for indoor, should pay attention to anti-moisture, anti-vibration. It is strictly forbidden to cover when charging. It should be placed in a place of ventilation and heat dissipation.

Second, the care of batteries:

1. When charging, the indicator light of the charger is a red light and a green light. After the light becomes green, it should be filled for 2 hours. This is beneficial for inhibiting lithium battery vulcanization.

2. The overcharge of the battery produces a large amount of gas to wash the plate, accelerating the release of the active material on the plate, shortening the battery life.

3. The overcharge of the battery accelerates the loss of water, causing the electrolyte to dry out and the temperature of the battery to rise, causing thermal runaway, expansion of the plate, and deformation of the shell.

4. Prevent long-term discharge, do not often discharge electric driving. Charge when the battery is reduced by 1/2.

Third, regular care batteries: should be timely water repair or the addition of small coppermaker lithium battery activator, lithium battery service life can be extended to more than two years.

In the use of electric bicycle lithium batteries pay attention to skills, if the long-term incorrect operation, the service life of electric bicycle lithium batteries will be greatly shortened, but it will cause frequent replacement trouble, time-consuming and laborious, increasing the cost of use.

The page contains the contents of the machine translation.