Lead-acid battery maintenance method

Maintenance

The most important component in the generator set is the lead storage battery. The performance of the lead storage battery is stable to ensure the performance of the entire generator set. How to ensure the stability of the lead storage battery? This requires battery maintenance.

First, the lead storage battery should be connected correctly to prevent short circuit conditions

The lead storage battery should be placed close to the generator set so that the battery connection line is not too long and the battery needs to be placed in a convenient place for maintenance. When the battery is linked to the generator, first connect the positive pole and then the negative pole. When the load or shutdown, the link should be disconnected in time to prevent the battery from short-circuiting.

Second, do a good job of daily battery inspection

Regularly check the battery, including the voltage at the battery end; the density, temperature, and height of the electrolyte in the battery; pay attention to whether the battery link is linked according to the specifications; check the battery to remember whether there is corrosion; do discharge test regularly, etc. These daily tasks are all needed.

Finally, battery charging work should pay special attention to

Battery charging is a basic job. It should be charged in a well ventilated environment without rain, snow, sparks or open flames. Charging is best done with the original charger. When charging, the link of the wires should be correct; use a reasonable current for charging; when charging the battery when the temperature is higher than 45 °C, the charging work should be stopped and the heat treatment should be done.

The maintenance work of the lead battery of the generator set is very important, and it must be paid attention to in daily use.

The page contains the contents of the machine translation.