23 Years' Battery Customization

Do you know the requirement of managing lithium battery warehouse?

Jan 09, 2019   Pageview:810

Because lithium is a metal that is particularly prone to chemical reactions, easy to extend and burn, lithium battery packaging and transportation, such as improper handling, easy to burn and explosion, accidents also occur from time to time. So the following requirements are made for lithium battery warehouse management:

 

Basic requirements:

 

(1)Lithium electricity pool and lithium battery pack belong to the dangerous goods; In order to ensure the security of the subsequent handling transport, all lithium battery (group) must pass UN38.3 test;

 

(2)Due to the characteristics of lithium batteries, storage environment must to be within 18 to 25 degrees.

 

(3) Humidity requirements: to effectively control the warehouse humidity, avoid the warehouse for a long time in extreme humidity (relative humidity higher than 90% or less than 90%)

 

(4) Lithium battery warehouse application brick wall entities apart, warehouse must adopt closed, explosion-proof, or other corresponding safety electric lighting equipment.

 

(5) The location of the store flammable and explosive article, should be equipped with adequate number of fire equipment, and always in good condition.

 

(6) Places with lithium batteries must be prohibited from smoking and other prohibited regulations

 

(7) It is not allowed to carry out operations that may cause fire in the vicinity of warehouses or sites where inflammable and explosive materials are stored

 

Second, the storage requirements:

 

(1) The battery should be stored in a well ventilated, dry and cool place of high temperature and high humidity may damage the battery performance and/or corrosion cell surface.

 

(2) Battery carton should not be piled in excess of the prescribed height if too much battery cartons are piled in

 

Together, at the bottom of the carton's battery could be out of shape, leakage may occur.

 

(3) The battery should avoid storing or displayed in direct sunlight or suffer in the rain. Battery was caught in the rain, will reduce insulation resistance, self discharge may occur and rust. Rising temperatures may damage the battery.

 

(4) in the original packing store and display the battery will be removed after the battery pile, easy cause short circuit and damage battery

 

(5) To contact each other easily lead to combustion, explosion and fire extinguishing methods of different items, should be isolated storage

 

Third, handling requirements:

 

(1) For material handling, no matter use what kind of transportation tool, should be properly handled, in case of material fall or injury.

 

(2) For material handling, load, laminated and direction should be considered.

 

(3)Use forklift truck or cart, its loading mode should be after heavy light, be shipped materials shall not exceed the width of the channel and the elevator door and height, the speed should be moderate.

 

(4) The movers shall use qualified mover tools (forklifts, carts, etc.).

 

(5) Battery cartons should be careful handling, rough handling may cause the battery short circuit or damaged, resulting in leakage, explosion, or fire.

 

Fourth, processing requirements

 

(1) In the case of with local laws and regulations do not contradict, lithium (original) battery can make public waste disposal.

 

(2) Do not remove the battery.

 

(3) Do not use fire to dispose of batteries except for approved controlled stoves.

 

Other requirements:

 

(1) Warehouse management personnel should check the goods information every day, such as the store a wrong, account is found not to conform, quality problems timely feedback and processing, end of the work or work, should carry on the inspection and cut off power supply.

 

(2) Clean and tidy the warehouse area every day, timely clean up the dirt and sundries on the ground, and arrange the materials in the warehouse into the designated area to meet the requirements of neat, neat, clean, hygienic and reasonable layout.

 

(3) Keep the safe passage unblocked in the warehouse, eliminate accumulation, and ensure the safety of personnel.

 

(4) The planning area in the warehouse shall be clearly marked, and the material storage area shall be classified into small areas and clearly marked.

 

The page contains the contents of the machine translation.

*
*
*
*
*

Leave a message

Contact Us

* Please enter your name

Email is required. This email is not valid

* Please enter your company

Massage is required.
Contact Us

We’ll get back to you soon

Done